NewAir AC-12100E User Manual download pdf (Page 7)

AIR CONDITIONER FEATURES

Before you begin, thoroughly familiarize yourself with the control panel and remote controller

and all its functions, then follow the symbol for the functions you desire.

The unit can be controlled by the unit control panel alone or with the remote controller .

ELECTRONIC CONTROL OPERATING INSTRUCTIONS

Fig. 4

NOTE: This manual does not include remote control operation instructions.Please see the

Remote Control Operation Instructions packed with the unit for details.

OPERATION PANEL OF THE AIR CONDITIONER

Selects the appropriate operating mode.

Each time you press the button, a mode

is selected in a sequence that goes from

AUTO, COOL, DRY, FAN and HEAT(except

cooling only models). The mode indicator light

illuminates under the different mode settings

MODE select button

Used to adjust (increasing/decreasing)

temperature settings(2°F/ 1°C increments)

in a range of 62°F (17°C) to 88°F (30°C)

orthe TIMER setting in a range of 0~24hrs..

UP( ) and DOWN( ) buttons

NOTE: The control is capable of displaying

temperature in degrees Fahrenheit or degrees

Celsius. To convert from one to the other, press

and hold the Up and Down buttons at the same

time, for 3 seconds.

Used to initiate the AUTO ON start time and

AUTO OFF stop time program, in conjunction

with the & buttons.

TIMER button

Used to initiate the SLEEP function.

SLEEP button

Power on/off.

POWER button

AUTO

HEAT

COOL

DRY

FAN

MODE

SLEEP

FAN

MED

LOW

TIMER ON

TIMER OFF

FAN button

Shows the set temperature in°F and°C and

the auto-timer settings.

While on DRY and FAN modes, it shows

the room temperature.

LED Display

SWING

Remote Signal Receptor

(Some models have the

signal receptor on the

front panel , Fig.2)

(Available only on

models with auto

swing feature.)

Control the fan speed. Press to select the fan

speed in four steps-LOW, MED, HI and AUTO.

The fan speed indicator light illuminates under

different fan settings except AUTO speed. When

the auto fan speed is selected, all the fan indicator

lightsturn dark.

Error codes:

E1- Room temperature sensor error-

Unplug the unit and plug it back in.

If error repeats, call for service.

E2- Evaporator temperature sensor error-

Unplug the unit and plug it back in.

If error repeats, call for service.

E4- Display panel communication error-

Unplug the unit and plug it back in.

If error repeats, call for service.

P1- Bottom tray is full - Connect the

drain hose and drain the collected

water away. If error repeats, call

for service.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Comments to this Manuals

No comments

NewAir AC-12100E User Manual Page 7

Comments to this Manuals

Related products and manuals for Mobile air conditioners NewAir AC-12100E