NewAir AC-12100E User Manual download pdf (Page 13)

INSTALLATION INSTRUCTIONS (optional)

Exhaust hose installation:

The exhaust hose and adaptor must be installed or removed

in accordance with the usage mode.

The duct can be compressed or extended moderately

according to the installation requirements, but it is

desirable to keep the duct length to a minimum.

1. Install the window exhaust adaptor B onto the exhaust

hose as shown in Fig.18a. or Fig.18b. Refer to the previous

pages for window kit installation.

2. Place the exhaust hose over against the air outlet opening

hook (See Fig.19) and flat the other end (See Fig.20) for

quick installation.

IMPORTANT:

DO NOT OVER BEND THE DUCT (SEE Fig. 22)

Fig.18b

Fig.19

Fig.20

Fig.22

The exhaust hose can be installed into the wall

(Not applicable to the units without adaptor A, expansion

plugs and wooden screws of Accessories ).

1. Prepare a hole in an outside wall. Install the wall exhaust

adaptor A in the hole using the 4 expansion plugs and wooden

screws. Be sure to affix securely. (See Fig.21)

2. Attach the exhaust hose to wall exhaustadaptor A.

Fig.21

max 47.24 inches

min11.81 inches

Adaptor A

Expansion plug

position

Adaptor

cap

Note:

Cover the hole using the adaptor cap when not in use.

Push in

Hook

Fig.18a

COOL,HEAT(heat pump type) or AUTO

mode

FAN,DEHUMIDIIFY or HEAT(electrical heat type)

mode

Install

Remove

1 2 ... 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

NewAir AC-12100E User Manual Page 13

Comments to this Manuals

Related products and manuals for Mobile air conditioners NewAir AC-12100E