Using the “On” Timer (Example):
1. When the heater is plugged in but not in operation, press the “TIMER” button. The
Indicator Light will display. Press the “TIMER” button to select your desired timer setting
(in sequence of 2H –4H–8H).
2. Press the “TIMER” button and the Indicator Light for 2H will display. Your heater is now
set to be turned on after 2 hours.
Using the “Off” Timer (Example):
1. When the heater is in operation, press the “TIMER” button. The Indicator Light will
display. Press the “TIMER” button to select your desired timer setting (in sequence of 2H –
4H–8H).
2. Press the “TIMER” button and the Indicator Light for 2H will display. Your heater is now
set to be turned off after 2 hours.
To disable the timer function, adjust the POWER to the OFF position.
Note: Once the timer is set, the heater will automatically operate with this setting in place until the
setting has been turned off or until the unit itself is turned off.
CAUTION: This heater features an overheat protection feature that shuts the unit off if it
overheats due to abnormal conditions. When this occurs, the “C” (Caution Indicator) light will turn
on. If this occurs, turn the heater “OFF”, unplug it, inspect the unit, and remove any objects on or
adjacent to the heater. Allow the unit to cool for a few minutes, plug it back in, and resume normal
operation.
ADDITIONAL FEATURES
This heater also includes the following additional features:
• Convenient front carrying handles and heavy-duty caster wheels for easy
maneuvering from room to room.
• Cord storage compartment for neatly storing the power cord when the heater is
not in use.
TROUBLESHOOTING
If your heater fails to operate, please follow these instructions:
• Ensure that the circuit breaker or fuse is working properly.
• Make sure the heater is plugged in and that the electrical outlet is working properly.
• Check for any obstructions in, near, or around the heater. If you find any
obstructions, turn the heater “OFF.” Unplug the heater and wait a few minutes for it
to cool down. Carefully remove the obstruction. Plug the heater in and turn it on
again by referring to the OPERATING INSTRUCTIONS.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE
WARRANTY INFORMATION FOR INSTRUCTIONS. DO NOT ATTEMPT TO OPEN OR
REPAIR THE HEATER YOURSELF AS DOING SO MAY VOID THE WARRANTY AND
CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS,
PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION
SECTION ON THE FOLLOWING PAGE.
When each timer is set, the green light will remain on, indicating that the timers have been set.
During operation, when the heater operates in the Time Set mode, the green light will turn red,
indicating that the heater is operating during its set time.
CLEANING AND STORAGE
It is recommended that the heater be cleaned at least once during the operating season
for optimum performance. ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG
THE HEATER BEFORE CLEANING. Be sure to save the carton for off-season storage.
• To clean the heater, first turn the heater to the “OFF” position. Unplug it and
wait for the heater to cool down.
• Use a dry cloth to clean only the external surfaces of the heater.
• Do not use any cleaning agents or detergents.
• Never immerse the heater in water.
• Pack the heater in the original carton and store it in a cool, dry place.
SPECIFICATIONS
Model No.: AH-450
Voltage: 120V, 60HZ
Current: Maximum continuous draw - 12.5 amps.
Power: HI =1500 Watts, MED = 900 Watts, LO = 600 Watts.
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals